Page 1 of 1

I need charging cradle measurements! HELP!

Posted: Sat Mar 22, 2014 3:14 pm
by Shinki_Crazed
Hello awesome folks :thumbsup: I need some assistance in my next project. I want to build a charging cradle for my Werkstra who is on her way. But I have no clue how large the cradle needs to be. Exact measurements would be greatly appreciated! Pictures are also welcome :cheesygrin:

Re: I need charging cradle measurements! HELP!

Posted: Sun Mar 23, 2014 2:45 pm
by Shinki_Crazed
solo wrote:The main white base is 3 5/8" inches wide, 6 1/8" long, and 3/4" thick. The black pad on top of the base is 2 15/16" wide, 4 5/16" long, and 3/32 thick, with the front edge set back 5/8" from the edge of hte white base. The seat back is 2 9/16" tall at the highest point, and has arm rest sort of groves at 5/8" above the pad, with 1 7/16" inside width and 1 3/16" to the sloping back rest. Max width at the bottom is 3 5/16" and 1 9/16" at the top, where the headrest is 7/32" thick with the edges coming forward 7/16. The black strip on the inside is 1 7/16" at the bottom and 13/16" at the top.

Pic for reference, let me know what kind of pictures you need to make those dimensions make sense.
Image

Oh this is perfect! Thank you so much, would you mind posting one more picture of the cradle and your Shinki laying flat on it? I want to see if her feet will hang.

Re: I need charging cradle measurements! HELP!

Posted: Tue Mar 25, 2014 11:21 am
by Shinki_Crazed
solo wrote:This help?

These are perfect! Thank you and your Shinki for the help :lol:

Re: I need charging cradle measurements! HELP!

Posted: Tue Mar 25, 2014 10:21 pm
by halconfenix
solo wrote:Now that I'm at work, wow. Those pictures are dark. I swear they looked normal at home. Glad they were helpful though.
more than helpful!
i'm also working on my own versiĆ³n of the cradle using 3d modeling/printing and all these pics and measurements help a LOT! thanks for the info!

Re: I need charging cradle measurements! HELP!

Posted: Tue Mar 25, 2014 11:25 pm
by Shinki_Crazed
halconfenix wrote:
solo wrote:Now that I'm at work, wow. Those pictures are dark. I swear they looked normal at home. Glad they were helpful though.
more than helpful!
i'm also working on my own versiĆ³n of the cradle using 3d modeling/printing and all these pics and measurements help a LOT! thanks for the info!


Oh! Please post progress pictures:0

Re: I need charging cradle measurements! HELP!

Posted: Wed Mar 26, 2014 10:28 pm
by halconfenix