Moderator: Chaos Incarnate
solo wrote:The main white base is 3 5/8" inches wide, 6 1/8" long, and 3/4" thick. The black pad on top of the base is 2 15/16" wide, 4 5/16" long, and 3/32 thick, with the front edge set back 5/8" from the edge of hte white base. The seat back is 2 9/16" tall at the highest point, and has arm rest sort of groves at 5/8" above the pad, with 1 7/16" inside width and 1 3/16" to the sloping back rest. Max width at the bottom is 3 5/16" and 1 9/16" at the top, where the headrest is 7/32" thick with the edges coming forward 7/16. The black strip on the inside is 1 7/16" at the bottom and 13/16" at the top.
Pic for reference, let me know what kind of pictures you need to make those dimensions make sense.
solo wrote:Now that I'm at work, wow. Those pictures are dark. I swear they looked normal at home. Glad they were helpful though.
halconfenix wrote:solo wrote:Now that I'm at work, wow. Those pictures are dark. I swear they looked normal at home. Glad they were helpful though.
more than helpful!
i'm also working on my own versión of the cradle using 3d modeling/printing and all these pics and measurements help a LOT! thanks for the info!
Users browsing this forum: No registered users and 1 guest