Here are the measurements for the two types of MMS I own in case you (like me) are interested in creating some custom parts. The measurements were taken with a caliper and accurate to +-0.02mm
MMS 1st:
Head Peg d. 3.23mm
Arm Peg d. 2.91mm L. 4.09mm
Arm Hex d. 3.20mm L. <1.57mm*
Hand Peg d. 2.00mm L. 4.31mm
Thigh Peg d. 3.98mm L. 4.93mm
Thigh Hex d. 6.14mm L. <1.46mm*
Foot Peg d. 2.53mm L. 4.22mm
Armor Peg d. 2.99 mm L. 3.08mm (cross d. 3.50mm)**
*The hexes were too small to measure, so I measured the spacers that fit over them. But the spacer sticks out a bit over the hex connector, hence the < sign.
MMS 3rd:
Head Peg d. 3.16mm
Arm Peg d. 2.85mm L. 5.27mm
Arm Hex N/A
Hand Peg d. 2.02mm L. 4.31mm
Thigh Peg d. 3.90mm L. 5.27mm
Thigh Hex N/A
Foot Peg d. 2.49mm L. 4.35mm
Armor Peg d. 2.99 mm L. 3.08mm (cross d. 3.38mm)**
**The armor pegs have a cross shaped bit that sticks out around the peg some. The cross d. is the diameter from one end of a cross arm to the opposite one.
Here is a picture!
In both cases I didn't measure the corresponding holes because I didn't see the need. We can assume they are just a bit bigger than the pegs. If anyone wants exact measurements for the holes, just ask.
MMS Peg Measurements
Moderator: Caterwaul
-
- MMS Naked
- Posts: 14
- Joined: Mon Aug 29, 2011 7:07 pm
- Shinkis owned: 5
- MMS owned: 1
- Favorite MMS/Shinki: Waffebunny
- Klinkin
- Class S Shinki
- Posts: 260
- Joined: Thu Jan 12, 2012 6:46 pm
- Shinkis owned: 2
- MMS owned: 0
- Favorite MMS/Shinki: Eukrante
Re: MMS Peg Measurements
Nice useful bit of info. I've been using 3.125mm (1/8th inch) as my hole size for armor pegs, and it tends to work well.
- Shiaoran
- Class S Shinki
- Posts: 832
- Joined: Thu Jun 02, 2011 4:39 pm
- Shinkis owned: 47
- MMS owned: 5
- Favorite MMS/Shinki: Altlene
- Location: Brazil
- Contact:
Re: MMS Peg Measurements
*votes for sticky*
- Xehn
- Kamen Adminder
- Posts: 1291
- Joined: Sun Apr 27, 2008 1:28 pm
- Shinkis owned: 33
- MMS owned: 0
- Favorite MMS/Shinki: Partio
- Contact:
Re: MMS Peg Measurements
you know, that's a good idea. done.
- Shiaoran
- Class S Shinki
- Posts: 832
- Joined: Thu Jun 02, 2011 4:39 pm
- Shinkis owned: 47
- MMS owned: 5
- Favorite MMS/Shinki: Altlene
- Location: Brazil
- Contact:
Re: MMS Peg Measurements
While we're at stickies, mind pinning this one too? viewtopic.php?f=36&t=1645
I keep having to browse for my own thread XD
I keep having to browse for my own thread XD
- Xehn
- Kamen Adminder
- Posts: 1291
- Joined: Sun Apr 27, 2008 1:28 pm
- Shinkis owned: 33
- MMS owned: 0
- Favorite MMS/Shinki: Partio
- Contact:
Re: MMS Peg Measurements
...it's completely strange that it hadn't been. Fixing that.
- Shiaoran
- Class S Shinki
- Posts: 832
- Joined: Thu Jun 02, 2011 4:39 pm
- Shinkis owned: 47
- MMS owned: 5
- Favorite MMS/Shinki: Altlene
- Location: Brazil
- Contact:
Re: MMS Peg Measurements
Thanks
- quotemarks
- Class B Shinki
- Posts: 94
- Joined: Fri May 08, 2015 9:46 am
- Shinkis owned: 8
- MMS owned: 8
- Favorite MMS/Shinki: Lirbiete
- Location: Sinagpore
- Contact:
Re: MMS Peg Measurements
Amusingly enough I've found that I can use Figma wrist balljoints with Arnval MKI's wrist sockets. Their armside pegs are actually rather shorter than MMS-1 pegs, but it fits well and now my Arnval sports Figma-jointed hands.
GNU Terry Pratchett