Bang04's Custom Works: Optimus Prime Beast Hunter

Talk about other toys we collect.

Bang04's Custom Works: Optimus Prime Beast Hunter

Postby bang04 » Mon Jan 21, 2013 5:15 am

Here is my latest plamo works

AGE-002 7-Blade

Image

Image

Image

After Big Ring war, EFF want to develop new Transformable MS for mass production and new weapon for X-Rounder. A.G. 151, EFF use AGE-2 as prototype to make AGE-002 for testing, but project have problem with pilot that need high performance X-Rounder, and system has highly stress to pilot. Until A.G.164 Vegan declared a full-scale invasion to Earth, Vegan attack the institute, so AGE-002 7-Blade is used to defend HQ base. In the battle, AGE-002 7-Blade destroy 2 MS Group and 1 Fa Zeos class battle ship, but with using wing of light more than limiter made AGE-002 damage from high speed acceleration. Without resource, AGE-002 cannot repair until battle of second moon end, but the data has send to use in FX-Burst System development.

Strider Mode

Image

Image

Image

Weapon
Image
Beam Katar X2

Image
Beam Saber X2

Image

Image

Image

Sigma Blade RifleX1

Image

Image

Image
Wing of LightX2

Image

Image

Image

How I modify

Image

- I hate AGE-2's knee design, so I add hobby base ball joint that made knee can move like others MG Gundam
- AGE-2 Normal's wing are hard to color, so I cut some part out that made it easier to remove wing white part from the blue part
- Made beam wing from clear resin. I don't know why bandai don't make giant beam part for AGE-2 Double Bullet, so I made it myself.
Last edited by bang04 on Sun Aug 04, 2013 11:34 am, edited 2 times in total.
User avatar
bang04
Class A Shinki
 
Posts: 142
Joined: Wed Aug 01, 2012 12:41 pm
Shinkis owned: 7
MMS owned: 3
Favorite MMS/Shinki: Altlene

Re: Bang04's Plamo Works: AGE-002 7-Blade

Postby MrHolister » Mon Jan 21, 2013 6:11 pm

Nice custom work. I enjoy the Gundam AGE line of figures personally.
Shinkis for sale or trade!
viewtopic.php?f=26&t=2119
MrHolister
Class S Shinki
 
Posts: 407
Joined: Thu Nov 15, 2012 1:05 am
Shinkis owned: 13
MMS owned: 0
Favorite MMS/Shinki: Vitulus

Re: Bang04's Plamo Works: Age-1 Full Vernian

Postby bang04 » Thu Jan 24, 2013 9:56 pm

Gundam Age-1 Full Vernian
Image
Image
Image
Gundam Age-1 with space high mobility pack

Image
Image
I made Age-1 with GP-01 Full vernian concept

Image
Image
Image
Beam rifle with short beam blade

Image
Image
Shield

Image
Image
Beam saber

Image
Image
Image
Image



MrHolister wrote:Nice custom work. I enjoy the Gundam AGE line of figures personally.


Thank you, for me Gundam AGE can modify to anything but not gundam (LOL). In Japan model web, I have seen many modify gundam age that look like Granzon, Huckebien, ZOE, Getter, Mazinger.
User avatar
bang04
Class A Shinki
 
Posts: 142
Joined: Wed Aug 01, 2012 12:41 pm
Shinkis owned: 7
MMS owned: 3
Favorite MMS/Shinki: Altlene

Re: Bang04's Plamo Works: Gundam Age-1 Full Vernian

Postby Caterwaul » Tue Jan 29, 2013 2:40 pm

Nice work on that one.
Image
User avatar
Caterwaul
News Reporter
 
Posts: 1414
Joined: Mon Apr 28, 2008 2:06 pm
Location: New Jersey, the suburb state
Shinkis owned: 0
MMS owned: 0
Favorite MMS/Shinki: Howling

Re: Bang04's Custom Works: Optimus Prime Beast Hunter

Postby bang04 » Sun Aug 04, 2013 11:33 am

Image

Image

Here I custom Voyager Class: Optimus Prime Beast Hunter.
Image
Weapon
Image
Beam Machinegun (I copy muvluv plamo's gun with resin and change handle.
Image
Image
http://i7.photobucket.com/albums/y266/b ... bf6ac3.jpg[/img]

Beam Gatling. I use Gundam Heavy Arm 1/100 gatling to modify it.
Image
Image
It still can attach at the back.
Image
Image
3rd Party Dr.Wu Star Saber is look good.
Image
Jet pack
Image
Image
Image
War Truck

Others modify
Image
Image
I made face cover and put ball joints instead the old one.
Image
Image
Image
I put ball joint at its heel to make it more articulation.

Omake
Image
One shall stand, and one shall fall
Image
Megatron must be stopped... no matter the cost.
Image
I have been foolish not to see what history has proven over and over again. That Autobots and Decepticons will never mend their ways. If there can be no diplomatic solution to this perpetual conflict, then I must not allow more darkness to fall upon this or any planet. Megatron must be destroyed!
Image
In any war, there are calms between the storms. There will be days when we lose faith, days when our allies turn against us. But the day will never come, that we forsake this planet and its people.
Image
Without a means of leaving this world, we Autobots take strength in the bonds we have forged with our three young friends. True warriors, if not in body, then in spirit. My name is Optimus Prime and I send this message. Though we did not choose to be of Earth, it would seem that we are here to stay. If you approach this planet with hostile intent, know this: We will defend ourselves. We will defend humanity. We will defend our home.
Image
Image
Jet War Truck
Image
Image
Image
Gerwalk Mode aka Walker AT- Prime (LOL)
Image
Image
with pretty

This is the 1st time for me to custom TF and also painting metallic color too.

Image
Image
Next time will be Megatron TF-Prime, but I need to charge up my money.
User avatar
bang04
Class A Shinki
 
Posts: 142
Joined: Wed Aug 01, 2012 12:41 pm
Shinkis owned: 7
MMS owned: 3
Favorite MMS/Shinki: Altlene

Re: Bang04's Custom Works: Optimus Prime Beast Hunter

Postby halconfenix » Sun Aug 04, 2013 2:37 pm

awesome!
:headbang:
how did you managed to créate the faceplate for prime???
User avatar
halconfenix
Official Tally Keeper
 
Posts: 1187
Joined: Tue Apr 29, 2008 11:00 am
Location: Manizales (Colombia)
Shinkis owned: 32
MMS owned: 0
Favorite MMS/Shinki: Space Shuttle Arnval

Re: Bang04's Custom Works: Optimus Prime Beast Hunter

Postby bang04 » Sun Aug 04, 2013 9:55 pm

I use plastic sheet and epoxy putty.

1st cut plastic sheet in to 2 pieces (trapezoid shape)
2nd mix epoxy putty and attach it on Optimus mouth
3rd put the plastic pieces on top of epoxy putty and use art knife to decorate epoxy that left over the plastic sheets

That's how i made the face cover.
User avatar
bang04
Class A Shinki
 
Posts: 142
Joined: Wed Aug 01, 2012 12:41 pm
Shinkis owned: 7
MMS owned: 3
Favorite MMS/Shinki: Altlene

Re: Bang04's Custom Works: Optimus Prime Beast Hunter

Postby MrHolister » Mon Aug 05, 2013 12:05 am

bang04 wrote:I use plastic sheet and epoxy putty.

1st cut plastic sheet in to 2 pieces (trapezoid shape)
2nd mix epoxy putty and attach it on Optimus mouth
3rd put the plastic pieces on top of epoxy putty and use art knife to decorate epoxy that left over the plastic sheets

That's how i made the face cover.

OMG! I bought and returned this prime because I had too little imagination with it. I would love to know more about the way you modified the head of Optimus. This is by FAR the most AWESOME Optimus I have seen yet. I want this as a showpiece. Any hints and tutorials you could provide would be awesome. Thanks for posting this up.
Shinkis for sale or trade!
viewtopic.php?f=26&t=2119
MrHolister
Class S Shinki
 
Posts: 407
Joined: Thu Nov 15, 2012 1:05 am
Shinkis owned: 13
MMS owned: 0
Favorite MMS/Shinki: Vitulus

Re: Bang04's Custom Works: Optimus Prime Beast Hunter

Postby Storm Wing » Mon Aug 05, 2013 2:35 am

Omg... O_o;; That gatling gun is just too awesome!
Cut! Cut cut cut cut cut cut cut cut CUT!!

Image

Spin the vermin, reverse the guilt. Reverse the birth, reverse the world. Spin spin spinspinspinSPIN~~~!
User avatar
Storm Wing
Class S Shinki
 
Posts: 952
Joined: Sun Nov 09, 2008 10:15 am
Location: Indonesia ^_^
Shinkis owned: 5
MMS owned: 3
Favorite MMS/Shinki: Asuka


Return to Other Toys

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

cron